The number of Profile of timing belts?

MXL XL L Profile Timing Belts



Optimistic travel belt programs were being very first designed that has a trapezoidal profile, such belts are MXL, XL and L. MXL timing belts are created of Polyurethane, bolstered with both Polyester or Kevlar cord or Nylon coated Neoprene, Fiberglass reinforced. 5 typical widths can be obtained and when essential other widths could be Reduce to get.

Timing Belts

widths: 1/4", 5/16", 3/8", and 1/2". As all our belts, inch timing belts can be cut to non-standard widths to meet your exact needsWhen a standard product won't meet your requirements we can provide alternative solutions through custom design and manufacturing. Our engineering and manufacturing teams will partner with you throughout the entire process.By providing design, development, manufacturing, assembly and testing in one location we can ensure the end product will meet your expectations. We specialize in both small to large production runs.

T Profile Timing Belt



T single-sided and double-sided timing belts are available in pitches 2.5, 5 and 10 mm. Made of polyurethane/rubber and reinforced with strong fiberglass tensile cords they are oil and ozone resistant. Fiberglass tensile cords provide many advantages including, high strength, low elongation, absence of creep and excellent dimensional stability. For a lightweight drive system pair these polyurethane timing belts with either aluminum pulleys or plastic pulleys.

Timing Belts

Timing belts for HTD and RPP Profile



HTD and RPP Profile Timing Belts can be necessary for multiple reasons, such as for drives that require a constant speed transfer or for those drives that are required to be as maintenance-free as possible.

Timing Belts

They can also be applied for multiple purposes, such as for high precision milling and grinding machines, office machines, household machines,The following product characteristics are expected: long service life, maintenance-free, high level of power transmission and antistatic behaviour in accordance, non-sensitive to external influences such as temperature fluctuations and moisture.

The special tooth form and the use of particularly resistant materials ensure YONGHANG TIMING BELTS these drive requirements without compromis.

Pu Timing belts - endless cast, with cleats and coatings



YONGHANG ALPHA linear and ALPHA V timing belts in the FDA blue version are produced from a PU base material with FDA approval for the direct transport of foodstuffs, and thus expand the wide range of YONGHANG polyurethane timing belts.

The blue timing belt has a hardness of 85 Shore A and is optionally equipped with an aramid or stainless steel tension cord. Profiles T5 and T10 with aramid cord are available from stock. The other profiles listed on the left are manufactured on request.

The thermoplastic polyurethane is eminently suitable for welding on the cleats made of FDA-approved base material. Base material, with a hardness and colours options to match those of the base belt.

In addition, the YONGHANG ALPHA V timing belt can be provided with top surface coatings, which are also made of FDA-approved base material.

Timing Belts

About the timing belt installation

In the course of the belt set up approach, it is critical that the belt be absolutely seated in the pulley grooves ahead of implementing last pressure. Serpentine drives with numerous pulleys and drives with massive pulleys are particularly susceptible to belt tensioning complications resulting through the belt enamel being only partially engaged inside the pulleys during installation. As a way to protect against these problems, the belt installation tension needs to be evenly timing belts distributed to all belt spans by rotating the technique by hand. Immediately after confirming that belt enamel are thoroughly engaged in the pulley grooves, belt tension should be rechecked and confirmed. Failure To achieve this may result in an less than tensioned condition with the potential for belt ratcheting.

The FHT (Fenner High Torque) curvilinear timing belt system provides sleek operation and higher torque carrying capacity with small backlash. These mini-pitch synchronous timing belts and pulleys can be found in the following pitches: one mm, 2 mm and 3 mm. The miniature pitch was built in response towards the growing have to have for scaled-down belt drives in today's sector area. Precise positioning, tranquil operation and small vibration, the mini-pitch generate system delivers a long time of trouble-absolutely free support For lots of programs, including 3D Printers, Pan and Tilt features, Medical Units and Vending Equipment.

The trapezoidal shape timing belt was superseded by a curvilinear tooth profile. As a consequence of their outstanding load carrying abilities, the curvilinear belts are promoted underneath the name of YONGHANG HTD drives. That is an abbreviation of High Torque Drives.

Leave a Reply

Your email address will not be published. Required fields are marked *